DIY IMS Solution Install

Moderator: FRUNKenstein

User avatar
steve578
OG (First 100 Outposters!)
Posts: 99
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Mon Feb 19, 2018 1:52 pm

While I have access to the transmission, I installed a new tranmission mount using the AGA tool.

EA45C8D2-E470-4BB0-8BDC-FFD004458687.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 99
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Mon Feb 19, 2018 1:54 pm

I’m still waiting on a few things and then I will start putting things back together.
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
FRUNKenstein
Curator Extraordinaire
Posts: 1665
Joined: Fri Jan 05, 2018 11:02 pm
Location: Overland Park, KS
Contact:

Re: DIY IMS Solution Install

Post by FRUNKenstein » Mon Feb 19, 2018 2:23 pm

Very nice write-up Steve! Thanks for taking the time to post this info up. It will be very helpful.
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4 Guards Red
1987 951 Guards Red

2006 955S Arctic Silver
2006 955S Lapis Blue
Gone but not forgotten: 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red

User avatar
steve578
OG (First 100 Outposters!)
Posts: 99
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Tue Feb 20, 2018 4:22 pm

The new engine case bolts arrived today. My car already had the updated bolts, but I decided to replace them anyways. Unfortunately, I forgot to take a picture.

New dual mass flywheel installed. Tourque bolts to 19 ft lbs and then turn 120*. I used a Sharpie and marked 12:00 on the bolt and about 4:00 on the flywheel.

FF5629D5-4345-4AA2-94E3-1E4C978FE38D.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 99
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Tue Feb 20, 2018 4:23 pm

Bolts marked with Sharpie.

245405D4-1382-48F3-9B47-491122A6FBDA.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 99
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Tue Feb 20, 2018 4:25 pm

New pressure plate installed. I hope the clutch is centered. I guess I’ll find out soon.

CBED36EE-E6C0-4965-8CAE-FA8104638E08.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
TheDeckMan
OG (First 100 Outposters!)
Posts: 299
Joined: Fri Feb 16, 2018 8:52 am
Location: Masshole behind communist lines
Contact:

Re: DIY IMS Solution Install

Post by TheDeckMan » Fri Mar 02, 2018 10:40 am

Great DIY

Image
996TT - GT2 Clone Build -RWD, UMW Tune, H&R RSS, Phenix Engineering Control Arms/LCA's, GT3 6 Pistons, SpeedTech 3" X-Pipe, Ported Headers, 997 GT3 Shifter, GT3 Buckets, GT2 Clutch/PP, GT2RS IC's, RSS Roll Bar, GT3 Brake Ducts, Joe Toth Aero/Ducts
997TT - Sport Chrono, LSD, UMW Tune, DSC, Phenix Engineering Toe Links & LCA Bushings, Tubi Race
Audi TT Track Car
Corrado SLC Corrado SLC
Saab 9-3 2.0t Saab 9-3 Aero 2.8t
GMC 2500HD 8.1
MG Midget
https://phenixengineering.com/

User avatar
steve578
OG (First 100 Outposters!)
Posts: 99
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Fri Mar 02, 2018 10:54 am

I need to finish this thread up. I finished it last weekend, but doing this install 98% myself on the garage floor wore me out. I have been driving it every day since and nothing has exploded so far.
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 99
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Fri Mar 02, 2018 10:59 am

TheDeckMan wrote:
Fri Mar 02, 2018 10:40 am
Great DIY

Image
Thanks! I have enjoyed most of this project. All the information available on the web made this job fairly straight forward. I referred to a DIY thread on Rennlist (dammit) and picked up little nuggets that helped with struggles.
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
FRUNKenstein
Curator Extraordinaire
Posts: 1665
Joined: Fri Jan 05, 2018 11:02 pm
Location: Overland Park, KS
Contact:

Re: DIY IMS Solution Install

Post by FRUNKenstein » Wed Mar 21, 2018 6:39 pm

Very nice work Steve. Love the idea of marking noon on the bolts and 4 pm on the flywheel
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4 Guards Red
1987 951 Guards Red

2006 955S Arctic Silver
2006 955S Lapis Blue
Gone but not forgotten: 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red

Post Reply