DIY IMS Solution Install

Moderator: FRUNKenstein

User avatar
steve578
OG (First 100 Outposters!)
Posts: 96
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Mon Feb 19, 2018 1:52 pm

While I have access to the transmission, I installed a new tranmission mount using the AGA tool.

EA45C8D2-E470-4BB0-8BDC-FFD004458687.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 96
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Mon Feb 19, 2018 1:54 pm

I’m still waiting on a few things and then I will start putting things back together.
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
FRUNKenstein
OG (First 100 Outposters!)
Posts: 1384
Joined: Fri Jan 05, 2018 11:02 pm
Location: Overland Park, KS
Contact:

Re: DIY IMS Solution Install

Post by FRUNKenstein » Mon Feb 19, 2018 2:23 pm

Very nice write-up Steve! Thanks for taking the time to post this info up. It will be very helpful.
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4 Guards Red
1987 951 Guards Red

2006 955S Arctic Silver
2006 955S Lapis Blue
Gone but not forgotten: 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red

User avatar
steve578
OG (First 100 Outposters!)
Posts: 96
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Tue Feb 20, 2018 4:22 pm

The new engine case bolts arrived today. My car already had the updated bolts, but I decided to replace them anyways. Unfortunately, I forgot to take a picture.

New dual mass flywheel installed. Tourque bolts to 19 ft lbs and then turn 120*. I used a Sharpie and marked 12:00 on the bolt and about 4:00 on the flywheel.

FF5629D5-4345-4AA2-94E3-1E4C978FE38D.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 96
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Tue Feb 20, 2018 4:23 pm

Bolts marked with Sharpie.

245405D4-1382-48F3-9B47-491122A6FBDA.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 96
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Tue Feb 20, 2018 4:25 pm

New pressure plate installed. I hope the clutch is centered. I guess I’ll find out soon.

CBED36EE-E6C0-4965-8CAE-FA8104638E08.jpeg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
TheDeckMan
OG (First 100 Outposters!)
Posts: 259
Joined: Fri Feb 16, 2018 8:52 am
Location: Masshole behind communist lines
Contact:

Re: DIY IMS Solution Install

Post by TheDeckMan » Fri Mar 02, 2018 10:40 am

Great DIY

Image
996TT - GT2 Clone Build -RWD, UMW Tune, H&R RSS, Phenix Engineering Control Arms/LCA's, GT3 6 Pistons, SpeedTech 3" X-Pipe, Ported Headers, 997 GT3 Shifter, GT3 Buckets, GT2 Clutch/PP, GT2RS IC's, RSS Roll Bar, GT3 Brake Ducts, Joe Toth Aero/Ducts
997TT - Sport Chrono, LSD, UMW Tune, DSC, Phenix Engineering Toe Links & LCA Bushings, Tubi Race
Audi TT Track Car
Corrado SLC
Corrado SLC
MG Midget

User avatar
steve578
OG (First 100 Outposters!)
Posts: 96
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Fri Mar 02, 2018 10:54 am

I need to finish this thread up. I finished it last weekend, but doing this install 98% myself on the garage floor wore me out. I have been driving it every day since and nothing has exploded so far.
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 96
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: DIY IMS Solution Install

Post by steve578 » Fri Mar 02, 2018 10:59 am

TheDeckMan wrote:
Fri Mar 02, 2018 10:40 am
Great DIY

Image
Thanks! I have enjoyed most of this project. All the information available on the web made this job fairly straight forward. I referred to a DIY thread on Rennlist (dammit) and picked up little nuggets that helped with struggles.
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
FRUNKenstein
OG (First 100 Outposters!)
Posts: 1384
Joined: Fri Jan 05, 2018 11:02 pm
Location: Overland Park, KS
Contact:

Re: DIY IMS Solution Install

Post by FRUNKenstein » Wed Mar 21, 2018 6:39 pm

Very nice work Steve. Love the idea of marking noon on the bolts and 4 pm on the flywheel
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4 Guards Red
1987 951 Guards Red

2006 955S Arctic Silver
2006 955S Lapis Blue
Gone but not forgotten: 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red

Post Reply