LNE Single Row Pro and Faultless Tool

Post Reply
User avatar
steve578
OG (First 100 Outposters!)
Posts: 102
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

LNE Single Row Pro and Faultless Tool

Post by steve578 » Wed Jun 20, 2018 11:16 am

I purchased an LN Engineering Single Row Pro with Faultless Tool, but decided to install an IMS Solution instead. I opened the boxes to inspect the Single Row Pro and the Faultless Tool, but both are new and have not been used. I will also include a used LN Engineering Spin-on Oil Filter Adapter since I had to change it out for the IMS Solution compatible filter adapter.

I'm in Houston, TX.

Included for $1,000:

Single Row Pro IMS Retrofit - 106.08.2.2 (New)
M96 Faultless Tool Kit - 106-08.22 (New)
Spin-on Oil Filter Adapter - 106-01 (used) - picture coming later

Not Included:

You will still need the IMS Pro Took Kit - 106-08.13 - which is not included.

IMG_2996.jpg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 102
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: LNE Single Row Pro and Faultless Tool

Post by steve578 » Wed Jun 20, 2018 11:18 am

IMG_2997.jpg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 102
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: LNE Single Row Pro and Faultless Tool

Post by steve578 » Wed Jun 20, 2018 11:18 am

IMG_3003.jpg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

User avatar
steve578
OG (First 100 Outposters!)
Posts: 102
Joined: Fri Jan 19, 2018 8:18 pm
Location: Houston

Re: LNE Single Row Pro and Faultless Tool

Post by steve578 » Wed Jun 20, 2018 11:18 am

IMG_3001.jpg
2004 C42
1987 924S
2016 Land Cruiser
1973 Wagoneer

Post Reply