Windshield washers not working

Post Reply
User avatar
DBJoe996
OG (First 100 Outposters!)
Posts: 161
Joined: Thu Feb 08, 2018 10:47 am
Location: Ormond Beach, Florida, USA

Re: Windshield washers not working

Post by DBJoe996 » Thu Jan 21, 2021 11:17 am

5chn3ll wrote: ↑Thu Jan 21, 2021 7:24 am Those fittings suck ass - but it could be worse...they could have been made out of the same plastic as the headlight harness insulation.
That's a good one! No replacement harness is available...anywhere. Last time I had the headlights out the insulation would just crumble. Now every time I turn on the headlights I wonder if the front end of the car is going to start on fire. :roll:
Top
User avatar
5chn3ll
Six shots...or only five?
Posts: 4654
Joined: Fri Jan 05, 2018 4:35 pm

Re: Windshield washers not working

Post by 5chn3ll » Thu Jan 21, 2021 11:21 am

One of my Litronics is a little dodgy about leveling once in a while...I'm avoiding taking that crap apart again as long as I possibly can.

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.
Top
Post Reply

Return to “996 Carrera (Naturally Aspirated / Non-Mezger)”