Good Week @ 996Outpost.com

User avatar
gnat
Power-drunk moderator
Posts: 4171
Joined: Sat Jan 06, 2018 6:54 am
Location: Lobby, VWGofA HQ

Re: Good Week @ 996Outpost.com

Post by gnat » Thu Feb 20, 2020 4:23 am

FRUNKenstein wrote: Wed Feb 19, 2020 7:48 pm Looky what got delivered to the museum today - brand new from factory - 5 miles on odometer . I went to lunch with the factory delivery guy - interesting guy from England who is a racer. Definitely had a Ford vs. Ferrari flavor to the whole experience.


20200219_113758.jpg

20200219_113928.jpg

20200219_113953.jpg
I'm gonna guess the ODO reads 10,000 by the time it goes back from all the "shuffling" that has to be done on a daily basis... :lol:

User avatar
32wildbilly
Never gonna run around and desert you
Posts: 5758
Joined: Sat Jan 06, 2018 2:46 pm
Location: Kneebraska

Re: Good Week @ 996Outpost.com

Post by 32wildbilly » Thu Feb 20, 2020 6:10 am

FRUNKenstein wrote: Wed Feb 19, 2020 7:48 pm Looky what got delivered to the museum today - brand new from factory - 5 miles on odometer . I went to lunch with the factory delivery guy - interesting guy from England who is a racer. Definitely had a Ford vs. Ferrari flavor to the whole experience.


20200219_113758.jpg

20200219_113928.jpg

20200219_113953.jpg
Is that one of those VW based kit cars?

Seriously, though how did you guys swing that?
Never gonna make you cry...

User avatar
B3DAWG
OG (First 100 Outposters!)
Posts: 1659
Joined: Sun Jan 07, 2018 11:46 am
Location: Gawga DAWG Country

Re: He's back!!!!!

Post by B3DAWG » Thu Feb 20, 2020 9:17 am

https://rennlist.com/forums/997-forum/1 ... rsche.html

haha... didn't take long for our Groov to chime in.

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Good Week @ 996Outpost.com

Post by 5chn3ll » Thu Feb 20, 2020 9:29 am

Can't say I've missed that guy. I'm sure he'll provide entertainment for a new generation of Rennlisters.

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

Kalashnikov
OG (First 100 Outposters!)
Posts: 1020
Joined: Tue Jan 16, 2018 1:04 pm
Location: Phoenix, AZ

Re: Good Week @ 996Outpost.com

Post by Kalashnikov » Thu Feb 20, 2020 10:15 am

He needs to be invited here. Along with Hurdi and JI.

I know Schnell you were enjoying KKs crazy posts just as I was. Can my car make it 50 miles? Should I tear down the motor after 300 miles? I made my own IMS bearing?

User avatar
32wildbilly
Never gonna run around and desert you
Posts: 5758
Joined: Sat Jan 06, 2018 2:46 pm
Location: Kneebraska

Re: Good Week @ 996Outpost.com

Post by 32wildbilly » Thu Feb 20, 2020 10:21 am

Kalashnikov wrote: Thu Feb 20, 2020 10:15 am He needs to be invited here. Along with Hurdi and JI.

I know Schnell you were enjoying KKs crazy posts just as I was. Can my car make it 50 miles? Should I tear down the motor after 300 miles? I made my own IMS bearing?
I think KK came here early on and was dispatched by Herr 5chn3ll post haste,
Never gonna make you cry...

User avatar
gnat
Power-drunk moderator
Posts: 4171
Joined: Sat Jan 06, 2018 6:54 am
Location: Lobby, VWGofA HQ

Re: Good Week @ 996Outpost.com

Post by gnat » Thu Feb 20, 2020 10:36 am

32wildbilly wrote: Thu Feb 20, 2020 10:21 am
Kalashnikov wrote: Thu Feb 20, 2020 10:15 am He needs to be invited here. Along with Hurdi and JI.

I know Schnell you were enjoying KKs crazy posts just as I was. Can my car make it 50 miles? Should I tear down the motor after 300 miles? I made my own IMS bearing?
I think KK came here early on and was dispatched by Herr 5chn3ll post haste,
We don't know that for sure, but as his basic existence violates our one rule, he is not welcome and will be ejected as soon as he is identified. Nothing good would come from being here, so there is no point.

Hurdi and JI would be welcome entertainment though.

Kalashnikov
OG (First 100 Outposters!)
Posts: 1020
Joined: Tue Jan 16, 2018 1:04 pm
Location: Phoenix, AZ

Re: Good Week @ 996Outpost.com

Post by Kalashnikov » Thu Feb 20, 2020 10:43 am

I don't think KK violates the rule. He is just mechanically paranoid. The guy probably has the best wrenching skills out of any non Jr person here and was really doing serious work on his 996 and other vehicles.

User avatar
OceanBlue2000
Fresh out of funny, ask Frunk
Posts: 674
Joined: Mon Jan 22, 2018 6:01 am
Location: Swamps o' Jersey

Re: Good Week @ 996Outpost.com

Post by OceanBlue2000 » Thu Feb 20, 2020 10:56 am

Kalashnikov wrote: Thu Feb 20, 2020 10:43 am I don't think KK violates the rule. He is just mechanically paranoid. The guy probably has the best wrenching skills out of any non Jr person here and was really doing serious work on his 996 and other vehicles.
From what I understand, he did a DIY IMS repair with a bearing not specifically designed for the purpose then sold the car to an unsuspecting buyer. Caveat emptor and all that, but no PPI is going to inspect the bearing and it is suspicious that he sold the car soon after. It was certainly "poor sportsmanship" to borrow Groovezilla's phrasing to sell the car without disclosing the experimental (let's see how this generic bearing does!) repair.
Mike
Strange things I have in head, that will to hand.
2000 Ocean Blue 996 Carrera 2
1982 928 (sold)

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Good Week @ 996Outpost.com

Post by 5chn3ll » Thu Feb 20, 2020 11:14 am

The guy is a dick who - in my opinion - vigorously fucked over the guy who bought his bodge-bearing 996 when it subsequently asploded. I believe I perma-banned that username early on - but I'll confirm.
Kalashnikov wrote: Thu Feb 20, 2020 10:43 am I don't think KK violates the rule. He is just mechanically paranoid. The guy probably has the best wrenching skills out of any non Jr person here and was really doing serious work on his 996 and other vehicles.
As far as Home Depot Hurdi and Johnny Irish:
images.jpg
images.jpg (5.73 KiB) Viewed 1694 times

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

Post Reply