Why are our engines so expensive?

User avatar
32wildbilly
OG (First 100 Outposters!)
Posts: 1236
Joined: Sat Jan 06, 2018 2:46 pm
Location: Kneebraska

Re: Why are our engines so expensive?

Post by 32wildbilly » Fri Sep 14, 2018 1:35 pm

gnat wrote:
Fri Sep 14, 2018 12:40 pm
32wildbilly wrote:
Fri Sep 14, 2018 12:14 pm


You are being just too logical and reasonable! Let me wallow in my misery for a while longer. :roll:
Oh you can still wallow away. I'm just pointing out that the markup isn't purely greed all the time (my crush washer example above is nothing but), but there is definitely a greed portion to it too.

At least we aren't Lamborghini owners. Talk about price gouging and they are sharing parts with the R8.
See...See there is always a silver lining! I feel much better now. I'm sure Lambo, Ferrari and Veyron (plus many other) owners would be laughing their butts off about my lamenting. :cry:

User avatar
FRUNKenstein
OG (First 100 Outposters!)
Posts: 1136
Joined: Fri Jan 05, 2018 11:02 pm
Location: Overland Park, KS
Contact:

Re: Why are our engines so expensive?

Post by FRUNKenstein » Fri Sep 14, 2018 6:39 pm

gnat wrote: The parts themselves don't cost much to manufacture once the process has been setup. So part of it is that there is a much bigger market for a Chevy engine so they can spread the R&D costs over a wider area which helps reduce costs. Posche engine upgrades have a much smaller market so you have to charge more to try to make up your startup costs.
Ha - you said "Chevy" and "R&D" in the same sentence.
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4 Guards Red
1987 951 Guards Red

2006 955S Arctic Silver
2006 955S Lapis Blue
Gone but not forgotten: 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red

User avatar
Black-Out
NG (Second 100 Outposters!)
Posts: 87
Joined: Thu Mar 22, 2018 10:18 am

Re: Why are our engines so expensive?

Post by Black-Out » Fri Sep 14, 2018 6:40 pm

Meh, I think you're over generalizing the price difference between a $25,000 high tech 3.6 liter Porsche engine with Variable valve lift, Timing, Variable geometry intake manifold, Variable geometry turbine technology on the turbo cars, and Fuel cooling built right into the a/c system and fuel rails on the Turbo compared to a basic Chevy V8. There's 1,000 times more tech in the little flat 6 than in the 383 you priced out presumably from a Tahoe. That engine is also modified to make that much power. If you move up to the LS6/LS7/LQ9/LS9 High output and boosted engines you'll quickly find out they aren't cheaper at all. They range from about $22,500 to $33,000 if you are looking for a built beast. Cheap is relative. I could find a Cheap Porsche engine for $4,000 or $5,000 dollars too. It just won't be the correct one with all the tech that makes your 911, what the factory intended for it to be.
William-
Current Ridez:
87' Dodge Conquest TSi
88' BMW 635CSi
89' Merkur XR4Ti
90' Mitsubishi 3000GT VR-4
95' BMW M3
99' BMW 328i Sedan
00' BMW 528i Sedan
00' Pontiac Fire Hawk Trans-Am
02' Porsche 911 Carrera
08' BMW 335i Coupe
10' Mercedes Benz E350 4-Matic AMG Sport

User avatar
gnat
OG (First 100 Outposters!)
Posts: 965
Joined: Sat Jan 06, 2018 6:54 am
Location: If you knew, you'd move

Re: Why are our engines so expensive?

Post by gnat » Fri Sep 14, 2018 7:17 pm

FRUNKenstein wrote:
Fri Sep 14, 2018 6:39 pm
Ha - you said "Chevy" and R&D" in the same sentence.
"What color plastic piece can we add with no actual benefit will these mullet headed rednecks buy?" counts as R&D too :P

AnthonyS
NG (Second 100 Outposters!)
Posts: 40
Joined: Sun May 20, 2018 5:51 pm

Re: Why are our engines so expensive?

Post by AnthonyS » Tue Oct 02, 2018 2:46 am

The old SBC is a simpler design. Every part is easier and cheaper to make and there are far fewer parts as a whole. Assembly is also easier.

The LS is more costly but a huge leap forward. It’s way cheaper than a flat six though.

I’m seriously considering selling my 91 ZR-1 to get an 02-04 Z06 to abuse. It’s the 405 hp, 3100 lb car decent suspension easy button. I don’t wamt to abuse the ZR-1 amd it’s a bloated pig in comparison.

And who cares how frugal some rich people are? Life isn’t a two time thing.... have fun.

User avatar
5chn3ll
Site Admin
Posts: 1178
Joined: Fri Jan 05, 2018 4:35 pm

Re: Why are our engines so expensive?

Post by 5chn3ll » Tue Oct 02, 2018 5:09 pm

Well, a lot of those high-tech inventions in the flat six were necessitated because of the insistence on continuing to use a flat six. A single-cam pushrod V8 is a dinosaur...just like a flat 6.

As far as building monster output: building boost on a SBC is always going to be cheaper than building boost on a flat six. A $30,000 built race motor might be putting down 1000 horsepower; a $30K Raby motor is going to put down what, 450? That's not even apples and oranges...more like apples and steaks.
Black-Out wrote:
Fri Sep 14, 2018 6:40 pm
Meh, I think you're over generalizing the price difference between a $25,000 high tech 3.6 liter Porsche engine with Variable valve lift, Timing, Variable geometry intake manifold, Variable geometry turbine technology on the turbo cars, and Fuel cooling built right into the a/c system and fuel rails on the Turbo compared to a basic Chevy V8. There's 1,000 times more tech in the little flat 6 than in the 383 you priced out presumably from a Tahoe. That engine is also modified to make that much power. If you move up to the LS6/LS7/LQ9/LS9 High output and boosted engines you'll quickly find out they aren't cheaper at all. They range from about $22,500 to $33,000 if you are looking for a built beast. Cheap is relative. I could find a Cheap Porsche engine for $4,000 or $5,000 dollars too. It just won't be the correct one with all the tech that makes your 911, what the factory intended for it to be.

User avatar
32wildbilly
OG (First 100 Outposters!)
Posts: 1236
Joined: Sat Jan 06, 2018 2:46 pm
Location: Kneebraska

Re: Why are our engines so expensive?

Post by 32wildbilly » Tue Oct 02, 2018 6:23 pm

5chn3ll wrote:
Tue Oct 02, 2018 5:09 pm
Well, a lot of those high-tech inventions in the flat six were necessitated because of the insistence on continuing to use a flat six. A single-cam pushrod V8 is a dinosaur...just like a flat 6.

As far as building monster output: building boost on a SBC is always going to be cheaper than building boost on a flat six. A $30,000 built race motor might be putting down 1000 horsepower; a $30K Raby motor is going to put down what, 450? That's not even apples and oranges...more like apples and steaks.
Black-Out wrote:
Fri Sep 14, 2018 6:40 pm
Meh, I think you're over generalizing the price difference between a $25,000 high tech 3.6 liter Porsche engine with Variable valve lift, Timing, Variable geometry intake manifold, Variable geometry turbine technology on the turbo cars, and Fuel cooling built right into the a/c system and fuel rails on the Turbo compared to a basic Chevy V8. There's 1,000 times more tech in the little flat 6 than in the 383 you priced out presumably from a Tahoe. That engine is also modified to make that much power. If you move up to the LS6/LS7/LQ9/LS9 High output and boosted engines you'll quickly find out they aren't cheaper at all. They range from about $22,500 to $33,000 if you are looking for a built beast. Cheap is relative. I could find a Cheap Porsche engine for $4,000 or $5,000 dollars too. It just won't be the correct one with all the tech that makes your 911, what the factory intended for it to be.
My point was hp to hp between a V8 and Flat6 when compared to pricing for rebuilt replacements is ridiculous and I stand by that observation. There were comments above concerning availability of cores and sheer numbers produced making things for the V8 cheaper, which has validity. Still...WTF?

Post Reply