Introducing Heidi and Franny's Garage

User avatar
Dr_Strangelove
Won't stay Banned
Posts: 1977
Joined: Wed Jan 17, 2018 2:46 pm
Location: Henderson, NV

Re: Introducting, Heidi and Franny's Garage

Post by Dr_Strangelove » Mon Jul 16, 2018 11:05 am

2003 Carrera: Dark Teal Metallic

User avatar
Heidi&FrannysGarage
Internet Superstars
Posts: 13
Joined: Sat Jul 14, 2018 2:33 pm
Location: Colorado
Contact:

Re: Introducting, Heidi and Franny's Garage

Post by Heidi&FrannysGarage » Thu Oct 11, 2018 10:25 am

Hey there,

Franny has posted another video (at my request - because someone asked us to make it) about the 996 Turbo Slave Cylinder Replacement. It was a bear of a job and she was not even going to do a video. However, I convinced her (since someone did request it), to post about some of the difficulties she had. Does anyone know, it there a specific Turbo area that I could let people know about this video? If most of you are already subscribed to the 996 playlists, I guess it doesn't matter anyhow. I just do not really want to post our own stuff. It seems a bit pretentious. Thank you. Heidi

User avatar
Heidi&FrannysGarage
Internet Superstars
Posts: 13
Joined: Sat Jul 14, 2018 2:33 pm
Location: Colorado
Contact:

Re: Introducting, Heidi and Franny's Garage

Post by Heidi&FrannysGarage » Thu Oct 11, 2018 10:30 am

FRUNKenstein wrote: Sat Jul 14, 2018 7:30 pm Well, I, for one, am quite disappointed in my fellow 996outposters for any untoward comments regarding these talented automotive enthusiasts.

giphy.gif

On behalf of those of us who simply enjoyed the videos without commentary, I bid you a hearty 996outpost welcome.
Thank you! Heidi

User avatar
Heidi&FrannysGarage
Internet Superstars
Posts: 13
Joined: Sat Jul 14, 2018 2:33 pm
Location: Colorado
Contact:

Re: Introducting, Heidi and Franny's Garage

Post by Heidi&FrannysGarage » Thu Oct 11, 2018 10:36 am

gnat wrote: Sat Jul 14, 2018 6:52 pm I saw the H&F registration come in and was suspect that this was another Opie incident in the making. But their first post is way too well spoken to be b3 in disguise again :lol:

I rule DT out as another possibility as there are more than 2 sentences with neither Miata nor track being mentioned :D

So it may just be possible that we have been joined by the real deal! If so, welcome and I hope we don't run you off ;)
:). I will hang out here when time permits. Franny does too. Thank you.

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Introducting, Heidi and Franny's Garage

Post by 5chn3ll » Thu Oct 11, 2018 10:50 am

Heh. OK, folks, try to ratchet down the chaos - there are REPUTABLE internet people here. At least we only MOSTLY embarrassed ourselves.

Again.

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

User avatar
B3DAWG
OG (First 100 Outposters!)
Posts: 1659
Joined: Sun Jan 07, 2018 11:46 am
Location: Gawga DAWG Country

Re: Introducing Heidi and Franny's Garage

Post by B3DAWG » Thu Oct 11, 2018 5:20 pm

Yea, I'm the one that put my foot in my mouth last time, but these two ladies are class acts. I've watched many of their videos.

User avatar
TheDeckMan
OG (First 100 Outposters!)
Posts: 345
Joined: Fri Feb 16, 2018 8:52 am
Location: Masshole behind communist lines
Contact:

Re: Introducing Heidi and Franny's Garage

Post by TheDeckMan » Fri Oct 12, 2018 10:19 am

I'll have to check it out, most do make this job to be a major PITA but it is no where near as bad as the internet makes it out to be.

Thanks for your contribution to the community Heidi&Frannys!
996TT - Widowmaker Project -RWD, UMW Tune, H&R RSS, Phenix Engineering Control Arms/LCA's, GT3 6 Pistons, SpeedTech 3" X-Pipe, Ported Headers, 997 GT3 Shifter, GT3 Buckets, GT2 Clutch/PP, GT2RS IC's, RSS Roll Bar, GT3 Brake Ducts, Joe Toth Aero/Ducts, Champion Thrust Arms
997TT - LSD, Chrono , UMW Tune, DSC, Phenix Engineering Toe Links & LCA Bushings, Tubi Race, 3" eRams, 964RS Engine Mounts
Audi TT Track Car
Corrado SLC
https://phenixengineering.com/

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Introducing Heidi and Franny's Garage

Post by 5chn3ll » Fri Oct 12, 2018 10:29 am

Don't be too hard on yourself - after all, this is essentially the last stop for those of us too dickish to play nice on REAL car forum sites...

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

User avatar
FRUNKenstein
Curator Extraordinaire
Posts: 3938
Joined: Fri Jan 05, 2018 11:02 pm
Location: Wheat field, dammit, wheat!
Contact:

Re: Introducting, Heidi and Franny's Garage

Post by FRUNKenstein » Fri Oct 12, 2018 11:40 am

Heidi&FrannysGarage wrote: Thu Oct 11, 2018 10:25 am Hey there,

Franny has posted another video (at my request - because someone asked us to make it) about the 996 Turbo Slave Cylinder Replacement. It was a bear of a job and she was not even going to do a video. However, I convinced her (since someone did request it), to post about some of the difficulties she had. Does anyone know, it there a specific Turbo area that I could let people know about this video? If most of you are already subscribed to the 996 playlists, I guess it doesn't matter anyhow. I just do not really want to post our own stuff. It seems a bit pretentious. Thank you. Heidi
Please post it in the 996 High Performance (996TT, GT2, GT3) section of this site.
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red

2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Introducing Heidi and Franny's Garage

Post by 5chn3ll » Fri Oct 12, 2018 2:06 pm

I moved a copy of this thread - with all of the turds deleted - to the high-performance section.

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

Post Reply