Introducing Heidi and Franny's Garage
- Dr_Strangelove
- Won't stay Banned
- Posts: 1994
- Joined: Wed Jan 17, 2018 2:46 pm
- Location: Henderson, NV
- Heidi&FrannysGarage
- Internet Superstars
- Posts: 13
- Joined: Sat Jul 14, 2018 2:33 pm
- Location: Colorado
- Contact:
Re: Introducting, Heidi and Franny's Garage
Hey there,
Franny has posted another video (at my request - because someone asked us to make it) about the 996 Turbo Slave Cylinder Replacement. It was a bear of a job and she was not even going to do a video. However, I convinced her (since someone did request it), to post about some of the difficulties she had. Does anyone know, it there a specific Turbo area that I could let people know about this video? If most of you are already subscribed to the 996 playlists, I guess it doesn't matter anyhow. I just do not really want to post our own stuff. It seems a bit pretentious. Thank you. Heidi
Franny has posted another video (at my request - because someone asked us to make it) about the 996 Turbo Slave Cylinder Replacement. It was a bear of a job and she was not even going to do a video. However, I convinced her (since someone did request it), to post about some of the difficulties she had. Does anyone know, it there a specific Turbo area that I could let people know about this video? If most of you are already subscribed to the 996 playlists, I guess it doesn't matter anyhow. I just do not really want to post our own stuff. It seems a bit pretentious. Thank you. Heidi
- Heidi&FrannysGarage
- Internet Superstars
- Posts: 13
- Joined: Sat Jul 14, 2018 2:33 pm
- Location: Colorado
- Contact:
Re: Introducting, Heidi and Franny's Garage
Thank you! HeidiFRUNKenstein wrote: ↑Sat Jul 14, 2018 7:30 pm Well, I, for one, am quite disappointed in my fellow 996outposters for any untoward comments regarding these talented automotive enthusiasts.
giphy.gif
On behalf of those of us who simply enjoyed the videos without commentary, I bid you a hearty 996outpost welcome.
- Heidi&FrannysGarage
- Internet Superstars
- Posts: 13
- Joined: Sat Jul 14, 2018 2:33 pm
- Location: Colorado
- Contact:
Re: Introducting, Heidi and Franny's Garage
. I will hang out here when time permits. Franny does too. Thank you.gnat wrote: ↑Sat Jul 14, 2018 6:52 pm I saw the H&F registration come in and was suspect that this was another Opie incident in the making. But their first post is way too well spoken to be b3 in disguise again
I rule DT out as another possibility as there are more than 2 sentences with neither Miata nor track being mentioned
So it may just be possible that we have been joined by the real deal! If so, welcome and I hope we don't run you off
Re: Introducting, Heidi and Franny's Garage
Heh. OK, folks, try to ratchet down the chaos - there are REPUTABLE internet people here. At least we only MOSTLY embarrassed ourselves.
Again.
Again.
Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.
Gone hunting with Alec Baldwin and Dick Cheney. Back soon.
- B3DAWG
- OG (First 100 Outposters!)
- Posts: 1659
- Joined: Sun Jan 07, 2018 11:46 am
- Location: Gawga DAWG Country
Re: Introducing Heidi and Franny's Garage
Yea, I'm the one that put my foot in my mouth last time, but these two ladies are class acts. I've watched many of their videos.
- TheDeckMan
- OG (First 100 Outposters!)
- Posts: 345
- Joined: Fri Feb 16, 2018 8:52 am
- Location: Masshole behind communist lines
- Contact:
Re: Introducing Heidi and Franny's Garage
I'll have to check it out, most do make this job to be a major PITA but it is no where near as bad as the internet makes it out to be.
Thanks for your contribution to the community Heidi&Frannys!
Thanks for your contribution to the community Heidi&Frannys!
996TT - Widowmaker Project -RWD, UMW Tune, H&R RSS, Phenix Engineering Control Arms/LCA's, GT3 6 Pistons, SpeedTech 3" X-Pipe, Ported Headers, 997 GT3 Shifter, GT3 Buckets, GT2 Clutch/PP, GT2RS IC's, RSS Roll Bar, GT3 Brake Ducts, Joe Toth Aero/Ducts, Champion Thrust Arms
997TT - LSD, Chrono , UMW Tune, DSC, Phenix Engineering Toe Links & LCA Bushings, Tubi Race, 3" eRams, 964RS Engine Mounts
Audi TT Track Car
Corrado SLC
https://phenixengineering.com/
997TT - LSD, Chrono , UMW Tune, DSC, Phenix Engineering Toe Links & LCA Bushings, Tubi Race, 3" eRams, 964RS Engine Mounts
Audi TT Track Car
Corrado SLC
https://phenixengineering.com/
Re: Introducing Heidi and Franny's Garage
Don't be too hard on yourself - after all, this is essentially the last stop for those of us too dickish to play nice on REAL car forum sites...
Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.
Gone hunting with Alec Baldwin and Dick Cheney. Back soon.
- FRUNKenstein
- Curator Extraordinaire
- Posts: 3968
- Joined: Fri Jan 05, 2018 11:02 pm
- Location: Wheat field, dammit, wheat!
- Contact:
Re: Introducting, Heidi and Franny's Garage
Please post it in the 996 High Performance (996TT, GT2, GT3) section of this site.Heidi&FrannysGarage wrote: ↑Thu Oct 11, 2018 10:25 am Hey there,
Franny has posted another video (at my request - because someone asked us to make it) about the 996 Turbo Slave Cylinder Replacement. It was a bear of a job and she was not even going to do a video. However, I convinced her (since someone did request it), to post about some of the difficulties she had. Does anyone know, it there a specific Turbo area that I could let people know about this video? If most of you are already subscribed to the 996 playlists, I guess it doesn't matter anyhow. I just do not really want to post our own stuff. It seems a bit pretentious. Thank you. Heidi
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver
Re: Introducing Heidi and Franny's Garage
I moved a copy of this thread - with all of the turds deleted - to the high-performance section.
Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.
Gone hunting with Alec Baldwin and Dick Cheney. Back soon.