Anyone know much about 3d printers?

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Anyone know much about 3d printers?

Post by 5chn3ll » Fri Feb 12, 2021 8:20 am

So basically what you're saying is that you should have done nothing for another 24 hours.

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

User avatar
gnat
Power-drunk moderator
Posts: 4171
Joined: Sat Jan 06, 2018 6:54 am
Location: Lobby, VWGofA HQ

Re: Anyone know much about 3d printers?

Post by gnat » Fri Feb 12, 2021 8:37 am

5chn3ll wrote: Fri Feb 12, 2021 8:20 am So basically what you're saying is that you should have done nothing for another 24 hours.
Yeap.

Didn't even get the snow over the last 24 hours that made it an urgent issue :x

User avatar
32wildbilly
Never gonna run around and desert you
Posts: 5758
Joined: Sat Jan 06, 2018 2:46 pm
Location: Kneebraska

Re: Anyone know much about 3d printers?

Post by 32wildbilly » Fri Feb 12, 2021 8:43 am

I just checked your weather and found out you live just north of the banana belt. Send some of that "heat" out here.
gnat wrote: Fri Feb 12, 2021 8:37 am
5chn3ll wrote: Fri Feb 12, 2021 8:20 am So basically what you're saying is that you should have done nothing for another 24 hours.
Yeap.

Didn't even get the snow over the last 24 hours that made it an urgent issue :x
Never gonna make you cry...

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Anyone know much about 3d printers?

Post by 5chn3ll » Fri Feb 12, 2021 9:12 am

I live my life below the banana belt...all four inches at a time. Nothing else matters: not the mortgage, not the store, not my team and all their bullshit. For those 20 seconds or less, I'm free.

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

User avatar
gnat
Power-drunk moderator
Posts: 4171
Joined: Sat Jan 06, 2018 6:54 am
Location: Lobby, VWGofA HQ

Re: Anyone know much about 3d printers?

Post by gnat » Fri Feb 12, 2021 9:33 am

5chn3ll wrote: Fri Feb 12, 2021 9:12 am I live my life below the banana belt...all four inches at a time. Nothing else matters: not the mortgage, not the store, not my team and all their bullshit. For those 20 seconds or less, I'm free.
Image

User avatar
5chn3ll
Six shots...or only five?
Posts: 4640
Joined: Fri Jan 05, 2018 4:35 pm

Re: Anyone know much about 3d printers?

Post by 5chn3ll » Sat Feb 13, 2021 10:20 am

Your jealousy cheapens you, Gnat. I suffer quietly on your behalf for the shame felt by your ancestors.

Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.

Gone hunting with Alec Baldwin and Dick Cheney. Back soon.

User avatar
gnat
Power-drunk moderator
Posts: 4171
Joined: Sat Jan 06, 2018 6:54 am
Location: Lobby, VWGofA HQ

Re: Anyone know much about 3d printers?

Post by gnat » Fri Mar 19, 2021 9:36 am

I may have a problem...

For Black Friday I bought 10kg of PLA for $100 (no shipping or taxes). I've used 2 spools so far and am working through a 3rd, so I have 7 unopened spools (not to mention probably another 8-10kg of filament from other manufacturers).

Today I found that company was doing another 10 for $100 deal and now I'm going to have another 10 spools running around.

Maybe I can print something to store all this filament in...

User avatar
32wildbilly
Never gonna run around and desert you
Posts: 5758
Joined: Sat Jan 06, 2018 2:46 pm
Location: Kneebraska

Re: Anyone know much about 3d printers?

Post by 32wildbilly » Fri Mar 19, 2021 10:34 am

How deep is that rabbit hole gonna get?
gnat wrote: Fri Mar 19, 2021 9:36 am I may have a problem...

For Black Friday I bought 10kg of PLA for $100 (no shipping or taxes). I've used 2 spools so far and am working through a 3rd, so I have 7 unopened spools (not to mention probably another 8-10kg of filament from other manufacturers).

Today I found that company was doing another 10 for $100 deal and now I'm going to have another 10 spools running around.

Maybe I can print something to store all this filament in...
Never gonna make you cry...

User avatar
gnat
Power-drunk moderator
Posts: 4171
Joined: Sat Jan 06, 2018 6:54 am
Location: Lobby, VWGofA HQ

Re: Anyone know much about 3d printers?

Post by gnat » Fri Mar 26, 2021 11:57 am

I think I need a new 3D printer...


User avatar
32wildbilly
Never gonna run around and desert you
Posts: 5758
Joined: Sat Jan 06, 2018 2:46 pm
Location: Kneebraska

Re: Anyone know much about 3d printers?

Post by 32wildbilly » Fri Mar 26, 2021 12:49 pm

Very cool! Consider how much the raw material must cost to print something like a full suit.
33FE03D3-4A12-4F63-882B-0B8CB2093C99_4_5005_c.jpeg
33FE03D3-4A12-4F63-882B-0B8CB2093C99_4_5005_c.jpeg (17.87 KiB) Viewed 1708 times
gnat wrote: Fri Mar 26, 2021 11:57 am I think I need a new 3D printer...

Never gonna make you cry...

Post Reply