What's in your toolbag?
- FRUNKenstein
- Curator Extraordinaire
- Posts: 3952
- Joined: Fri Jan 05, 2018 11:02 pm
- Location: Wheat field, dammit, wheat!
- Contact:
What's in your toolbag?
What tool do you have in your toolbag that you think is worth its weight in gold? Maybe it's a certain brand of torque wrench that has served flawlessly for 20 years, making it a trusted workshop companion and also a good value, even if it was a bit pricey when you bought it.
I'll start with the new breed of lithium ion jump boxes/battery backups. There a bunch of models that have just come onto the market in the past couple of years. Recently, I purchased a Weego Professional. Actually, I bought 4 of them - one for my car, my wife's and both of my driving age sons' cars. It has a ton of connectors to allow it to serve as a battery backup for your cell phones and laptops as well. They hold a charge for 6 to 12 months and you can just keep them in your glovebox (or door pockets for you Mk I guys) for that time when you battery gives up the ghost. They were on sale at walmart.com last week, discount from $160 to $58. Unfortunately, I just checked, and the price is back up to $136. Again, there many models out there and the newer ones are no larger than a cellphone. Great tool to have.
I'll start with the new breed of lithium ion jump boxes/battery backups. There a bunch of models that have just come onto the market in the past couple of years. Recently, I purchased a Weego Professional. Actually, I bought 4 of them - one for my car, my wife's and both of my driving age sons' cars. It has a ton of connectors to allow it to serve as a battery backup for your cell phones and laptops as well. They hold a charge for 6 to 12 months and you can just keep them in your glovebox (or door pockets for you Mk I guys) for that time when you battery gives up the ghost. They were on sale at walmart.com last week, discount from $160 to $58. Unfortunately, I just checked, and the price is back up to $136. Again, there many models out there and the newer ones are no larger than a cellphone. Great tool to have.
Last edited by FRUNKenstein on Mon Jan 08, 2018 8:37 am, edited 1 time in total.
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver
Re: What's in your toolbag?
Just don't hook them up backward. They go pop. Ask me how I know.
2002 Guards Red Targa, Fister exhaust, H&R Sport Springs, semisolid motor mounts
1997 MX-5 track car
Friday at the Track, Chin Trackdays, SCCA WDCR Novice Classroom Instructor, SCDA, Audi Club Potomac, TrackDaze HPDE Instructor
June 16, 2017 Funland GoKart Champion (6:13 p.m. main event)
Willing to risk life for track time
1997 MX-5 track car
Friday at the Track, Chin Trackdays, SCCA WDCR Novice Classroom Instructor, SCDA, Audi Club Potomac, TrackDaze HPDE Instructor
June 16, 2017 Funland GoKart Champion (6:13 p.m. main event)
Willing to risk life for track time
Re: What's in your toolbag?
The single most useful thing I have purchased since starting to wrench on cars is an OBD-II code scanner. I now own a crap ton of them, including the "enthusiast" version of the Durametric cable - but any crappy OBD-II scanner will work.
Also, the fuses that light up when they're blown. Best invention since...I don't know.
Also, the fuses that light up when they're blown. Best invention since...I don't know.
Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.
Gone hunting with Alec Baldwin and Dick Cheney. Back soon.
-
- OG (First 100 Outposters!)
- Posts: 1020
- Joined: Tue Jan 16, 2018 1:04 pm
- Location: Phoenix, AZ
Re: What's in your toolbag?
Fuck, looks like Schnells picture uploader thing broke.
Re: What's in your toolbag?
Small LED pen light with a magnet. I have 4 of them, put in various locations around the house and garage: on my toolbox, on my lift, refrigerator.
- Sneaky Pete
- OG (First 100 Outposters!)
- Posts: 90
- Joined: Fri Jan 05, 2018 9:45 pm
- Location: Hoosierland
Re: What's in your toolbag?
My Airlift tool is the coolest thing since sliced bread making coolant flushes a breeze.
- Attachments
-
- UVU550000.jpg (34.2 KiB) Viewed 8119 times
Pete
PCA Member and National DE Instructor
2005 997.1S 4.0......yeh it's not a 996...so what!
2017 Audi Q5 S-line
2012 Ram 3500 Deleted Diesel
1964 Spitfire Racecar
1973 Group 44 Spitfire Racecar
PCA Member and National DE Instructor
2005 997.1S 4.0......yeh it's not a 996...so what!
2017 Audi Q5 S-line
2012 Ram 3500 Deleted Diesel
1964 Spitfire Racecar
1973 Group 44 Spitfire Racecar
Re: What's in your toolbag?
The Airlift is a great tool. A really good stud extractor is also a necessity when you're a ham-fisted hack like me.
I like this cammed extractor when the bolt has at least half an inch left exposed, and the drill chuck style extractors work well when you have very little meat left on the busted screw.
Once you're down to your last bit of exposed screw - shear off any more and you'll be Easy-Outing - slow down and hit the stud with PB Blaster and heat.
I like this cammed extractor when the bolt has at least half an inch left exposed, and the drill chuck style extractors work well when you have very little meat left on the busted screw.
Once you're down to your last bit of exposed screw - shear off any more and you'll be Easy-Outing - slow down and hit the stud with PB Blaster and heat.
Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.
Gone hunting with Alec Baldwin and Dick Cheney. Back soon.
- trailbrake996
- OG (First 100 Outposters!)
- Posts: 21
- Joined: Mon Jan 29, 2018 4:24 am
Re: What's in your toolbag?
Milwaukee M12 Ratchet. I'll never go back to manual tools again - the entire M12 line is very impressive.
2003 Arctic Silver Metallic C2
Manual, FVD Motorsports Oil Pan, X74, FVD 200 Cell X-Pipe Cats, Fister exhaust, low-temp thermostat, assorted LN goodies, Tranzit Blu HF
1996 Midnight Blue C2
Manual, PSS10, H&R Sways, Rennline Mounts, FDM Golden Rod
PCA Member & National HPDE Instructor
Manual, FVD Motorsports Oil Pan, X74, FVD 200 Cell X-Pipe Cats, Fister exhaust, low-temp thermostat, assorted LN goodies, Tranzit Blu HF
1996 Midnight Blue C2
Manual, PSS10, H&R Sways, Rennline Mounts, FDM Golden Rod
PCA Member & National HPDE Instructor
- FRUNKenstein
- Curator Extraordinaire
- Posts: 3952
- Joined: Fri Jan 05, 2018 11:02 pm
- Location: Wheat field, dammit, wheat!
- Contact:
Re: What's in your toolbag?
^ That's interesting. I have a battery powered impact wrench, but it just doesn't seem to generate sufficient torque (for example, to remove a wheel, so I don't trust it to tighten the lug bolts either). I end up breaking the nut or bolt loose manually, then using the impact wrench to save me the effort of turning the wrench a bunch of times. Seems like a regular drill would work just as well. So, what kind of torque does this thing have? Is it the same thing where you break the bolt/nut loose then grab this tool to finish up?
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver
- trailbrake996
- OG (First 100 Outposters!)
- Posts: 21
- Joined: Mon Jan 29, 2018 4:24 am
Re: What's in your toolbag?
This isn't for breaking loose lug bolts or anything where you need a ton of torque. It's for when you'd use any normal 3/8" ratchet - which for me is a lot. I use this for just about everything (interior, suspension, underbody panels, exhaust, motor mounts, etc...) prior to busting out a torque wrench for the final step. I use breaker bars for when I need a ton of torque. You'd be amazed how much less you ache after spending a weekend wrenching when you haven't twisted your arm/wrist a thousand times because the M12 is push button.kcattorney wrote: ↑Tue Jan 30, 2018 8:15 am ^ That's interesting. I have a battery powered impact wrench, but it just doesn't seem to generate sufficient torque (for example, to remove a wheel, so I don't trust it to tighten the lug bolts either). I end up breaking the nut or bolt loose manually, then using the impact wrench to save me the effort of turning the wrench a bunch of times. Seems like a regular drill would work just as well. So, what kind of torque does this thing have? Is it the same thing where you break the bolt/nut loose then grab this tool to finish up?
2003 Arctic Silver Metallic C2
Manual, FVD Motorsports Oil Pan, X74, FVD 200 Cell X-Pipe Cats, Fister exhaust, low-temp thermostat, assorted LN goodies, Tranzit Blu HF
1996 Midnight Blue C2
Manual, PSS10, H&R Sways, Rennline Mounts, FDM Golden Rod
PCA Member & National HPDE Instructor
Manual, FVD Motorsports Oil Pan, X74, FVD 200 Cell X-Pipe Cats, Fister exhaust, low-temp thermostat, assorted LN goodies, Tranzit Blu HF
1996 Midnight Blue C2
Manual, PSS10, H&R Sways, Rennline Mounts, FDM Golden Rod
PCA Member & National HPDE Instructor