Upgraded my shitty HF welder with an incrementally less shitty HF welder
Upgraded my shitty HF welder with an incrementally less shitty HF welder
The wire feed rotted completely off my old Harbor Freight flux-core welder a couple of years back, and I’ve been stuck booger-welding with my ancient stick welder ever since. Mrs. S. has some artsy-type stuff she wants me to do for her, so it was a great excuse to buy the low-end inverter welder. First project will be to weld up a cart for both functional welders and the plasma cutter.
Bonus: the POS it replaces has a beefy 120v transformer I can use for a 12v electromagnetic “vise” build for my pop’s milling machine.
Bonus: the POS it replaces has a beefy 120v transformer I can use for a 12v electromagnetic “vise” build for my pop’s milling machine.
Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.
Gone hunting with Alec Baldwin and Dick Cheney. Back soon.
- Cuda911
- Possum Hauler
- Posts: 898
- Joined: Fri Jan 05, 2018 6:34 pm
- Location: Oceanside and Vista (N. San Diego County), CA
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
Great! Now you can fix that rusty 914 Frunk wants to buy!
Mike
'68 Ford Custom 500; '70 Plymouth Cuda; '71 Ford Econoline; 73 Porsche 914 1.7, '74 Porsche 914 1.8; '74 Suzuki TC185; '86 Suzuki GS450L; '88 Subaru GL104WD Turbo Ltd Edn;; '88 Subaru XT; '91 Lexus ES250; '93 Jeep Wrangler, '99 Porsche Boxster, '03 Turbo VW Beetle; '03 Porsche Boxster; '03 Porsche Carrera C2; '07 Porsche Cayman, '11 BMW 328i, '12 Porsche 991 S, '14 Porsche Cayman, & a mishmash of other vehicles.
'68 Ford Custom 500; '70 Plymouth Cuda; '71 Ford Econoline; 73 Porsche 914 1.7, '74 Porsche 914 1.8; '74 Suzuki TC185; '86 Suzuki GS450L; '88 Subaru GL104WD Turbo Ltd Edn;; '88 Subaru XT; '91 Lexus ES250; '93 Jeep Wrangler, '99 Porsche Boxster, '03 Turbo VW Beetle; '03 Porsche Boxster; '03 Porsche Carrera C2; '07 Porsche Cayman, '11 BMW 328i, '12 Porsche 991 S, '14 Porsche Cayman, & a mishmash of other vehicles.
- 32wildbilly
- Never gonna run around and desert you
- Posts: 5791
- Joined: Sat Jan 06, 2018 2:46 pm
- Location: Kneebraska
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
Nice! I would suggest NOT using it as a jack stand...5chn3ll wrote: ↑Fri Jul 10, 2020 10:01 pm The wire feed rotted completely off my old Harbor Freight flux-core welder a couple of years back, and I’ve been stuck booger-welding with my ancient stick welder ever since. Mrs. S. has some artsy-type stuff she wants me to do for her, so it was a great excuse to buy the low-end inverter welder. First project will be to weld up a cart for both functional welders and the plasma cutter.
0DE50622-F746-4E18-8128-F840F6B72C28.jpeg
Bonus: the POS it replaces has a beefy 120v transformer I can use for a 12v electromagnetic “vise” build for my pop’s milling machine.
Never gonna make you cry...
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
It's no stack o' dimes - but I think I could eventually not be 100% shitty with this thing...
Understeer: You will hit the wall with the front end.
Oversteer: You will hit the wall with the rear end.
Horsepower: How hard you will hit the wall.
Torque: How far you will move the wall.
Gone hunting with Alec Baldwin and Dick Cheney. Back soon.
- 32wildbilly
- Never gonna run around and desert you
- Posts: 5791
- Joined: Sat Jan 06, 2018 2:46 pm
- Location: Kneebraska
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
As long as you can stick stuff together that stays stuck together you are doing very good.
Never gonna make you cry...
- Dr_Strangelove
- Won't stay Banned
- Posts: 1994
- Joined: Wed Jan 17, 2018 2:46 pm
- Location: Henderson, NV
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
Are the little "sputters" around your welds discharged from the welder or is that a technique thing you need to clean up?
2003 Carrera: Dark Teal Metallic
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
As a once certified welder*, the top line actually doesn't look terrible. The bottom line is shit though and you should be ashamed of yourself.
* The wife refuses to take me with her to any art exhibit where welding is involved as I spend the whole time complaining about all their shit welds
* The wife refuses to take me with her to any art exhibit where welding is involved as I spend the whole time complaining about all their shit welds
- 32wildbilly
- Never gonna run around and desert you
- Posts: 5791
- Joined: Sat Jan 06, 2018 2:46 pm
- Location: Kneebraska
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
I'm spoiled on weld appearance due to a previous shop I managed we bought a computer control welding robot from a firm in Germany. It had two articulated welding positions for reconditioning the axel bores for the motors under diesel locomotives. It was awesome! The employees named it "Krazy Karl". It would locate the bore, measure off to determine how much weld it needed to add and put it on faster than you can blink. It would bounce back and forth between the two different motors to prevent imparting too much heat in the bore. The travel speed was shocking. The weld was perfect...no pockets or defects and only enough put on for machining back to proper size. So much better than a manual weld any of the welders could lay down, but I think 5chn3ll's weld is good for a home job.gnat wrote: ↑Thu Jul 16, 2020 9:47 am As a once certified welder*, the top line actually doesn't look terrible. The bottom line is shit though and you should be ashamed of yourself.
* The wife refuses to take me with her to any art exhibit where welding is involved as I spend the whole time complaining about all their shit welds
Never gonna make you cry...
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
It just happens, but the amount suggests that he could turn the electricity down a bit. It also happens when you let your rod/wire submerge into the weld, but I don't see any suggestion that he did that.Dr_Strangelove (whew!) wrote: ↑Thu Jul 16, 2020 9:29 am Are the little "sputters" around your welds discharged from the welder or is that a technique thing you need to clean up?
Except for the one spot in the middle and end (left) on the top weld he kept a nice steady pace even if it was made a bit fast. The bottom weld, on the other hand not only moved too fast, but he didn't keep pace which which is why the puddles are more pronounced, oval, and has flat/thin areas.
I'd say Herr Schnell has the makings of a decent welder. Just needs to work on adjusting the power and being more steady with his travel.
- FRUNKenstein
- Curator Extraordinaire
- Posts: 3967
- Joined: Fri Jan 05, 2018 11:02 pm
- Location: Wheat field, dammit, wheat!
- Contact:
Re: Upgraded my shitty HF welder with an incrementally less shitty HF welder
NO WELDER FOR YOU, SCHN3LL!
www.kansascityautomuseum.com
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver
Current:
2002 996TT X50, Guards Red
1987 928S4, Guards Red
1987 951, Guards Red
1973 914 2.0 Bahia Red
2006 955S, Lapis Blue
Other toys:
1988 BMW 325i Cabriolet, Alpin Weiss
1987 Bertone X1/9, Verde Chiaro
Gone but not forgotten: 1975 914 2.0, Laguna Blue; 1999 996 C4 Aerokit Black; 1990 964 C2 Guards Red; 2006 955S Arctic Silver